Showing 85–96 of 106 results
-
QAR190.00
The Simplex 4098-9794 is a modular TrueAlarm sounder base designed for use with compatible TrueAlarm photoelectric and heat sensor heads. It combines an audible notification appliance and an analog addressable sensor interface into a single ceiling- or wall-mounted device.
The base provides a built-in piezoelectric sounder rated at 88 dBA minimum at 10 feet, operating from 24 VDC or from a compatible Notification Appliance Circuit (NAC). When NAC powered, sounder operation can be synchronized (Temporal, March Time, etc.) by the NAC. The sounder can also be manually activated from the control panel.
TrueAlarm analog sensor information is digitally communicated to the fire alarm control panel via IDNet or MAPNET II communications. Address selection is base-mounted, allowing the programmed address to remain with the installed location even when the sensor head is removed for service.
The 4098-9794 is listed to UL 268 for smoke detection (with compatible sensor) and UL 464 as an audible notification appliance.
-
QAR160.00
The Simplex 4099-9006 is an individually addressable manual fire alarm station designed for use with Simplex IDNet or MAPNET II communications systems. This model features double-action push operation, requiring the operator to push a spring-loaded interference plate before pulling the lever to initiate an alarm.
The integral addressable module (IAM) continuously monitors status and communicates changes to the connected Simplex fire alarm control panel over a single pair of wires. A visible LED indicator flashes during communications and remains steady when activated. The pull lever latches in the alarm position and protrudes from the housing to provide a clear visual indication.
The 4099-9006 is constructed of durable Lexan polycarbonate, supports surface or semi-flush mounting, and is UL listed to Standard 38. It is NEMA 1 rated when used with the appropriate back box.
-
QAR1,400.00
The Simplex 4100-3109 (Hardware PCB Part Number: 566-239) is a high-performance IDNet 2 addressable loop interface card designed for Simplex 4100ES and 4100U Fire Alarm Control Panels (FACPs). This crucial expansion module acts as the central communication hub between your fire alarm control panel and intelligent, addressable field devices.
Engineered for flexibility and robust survivability, this IDNet 2 card manages up to 250 addressable points across its signaling line circuits (SLCs), providing reliable data transmission and power to addressable smoke detectors, heat detectors, monitor modules, and control points.
-
QAR2,250.00
The Simplex 4100-5401 ES-PS Power Supply Module is a primary system power supply designed for Simplex 4100ES addressable fire alarm control units. It provides regulated system power, battery charging, auxiliary outputs, and expansion capability for compatible option cards installed in the control panel.
The module operates from a 120–240 VAC input and converts power to regulated 24 VDC for the fire alarm control panel and connected field devices. It also includes a dual-rate, temperature-compensated battery charger capable of charging sealed lead-acid batteries up to 110 Ah when used with an external battery cabinet.
-
QAR13,500.00
The Simplex 4100-9701 is a core hardware assembly for the Simplex 4100ES Fire Alarm Control Panel (FACP). Specifically, this part number designates the ES-PS Master Controller Bay equipped with an English 2×40 character LCD user interface.
While a base master controller natively includes a standard dual-loop card, your specific system configuration contains 4 Addressable Loops (achieved via an expansion module) and 2 Notification Appliance Circuits (NACs).
-
The Simplex 4606-9101 is a remote LCD Annunciator designed to mirror fire alarm control panel information at a location away from the main panel. It allows building staff and emergency personnel to monitor and control system status from a convenient entry point, like a lobby or guard station.
-
QAR180.00
The Simplex 4906-9105 is a non-addressable, weatherproof multi-candela strobe designed for wall mounting in fire alarm systems. Housed in a rugged, UV-stable red thermoplastic enclosure, this unit provides high-visibility visual alerts in harsh indoor or outdoor environments with extended temperature and humidity variations.
-
QAR180.00
The Simplex 4906-9127 is a wall-mounted TrueAlert multi-candela audible/visible notification appliance featuring a 24 VDC electronic horn and high-output xenon strobe. Designed for SmartSync two-wire operation, it allows independent horn and strobe control on the same NAC circuit.
This model provides selectable strobe intensity settings of 15, 30, 75, or 110 candela, minimizing inventory requirements and simplifying field configuration. The horn supports steady, ANSI Temporal, or 60 BPM March Time patterns and operates as “on-until-silenced,” while the strobe operates as “on-until-reset” when used with compatible SmartSync control sources.
The housing is constructed of rugged, high-impact, flame-retardant thermoplastic and mounts to standard single-gang, double-gang, or 4-inch square electrical boxes.
-
QAR240.00
The Simplex 4906-9131 is a TrueAlert® weatherproof multi-candela horn/strobe designed for wall-mounted audible and visible fire alarm notification in indoor or outdoor applications. This non-addressable 24 VDC appliance features a NEMA 3R rated enclosure suitable for extended temperature and humidity environments. The strobe intensity is field-selectable, and the unit supports SmartSync two-wire operation, allowing independent horn and strobe control on the same NAC. The polarized input connects to compatible reverse polarity supervised notification appliance circuits. The 4906-9131 is UL and ULC listed and FM approved for regulated 24 VDC operation.
-
QAR240.00
Description
TrueAlert ES addressable A/Vs are individually addressed audible/visible notification appliances that receive power, supervision, and control signals from a Simplex FACU providing IDNAC Signaling Line Circuits (SLCs).
-
QAR70.00
The Simplex 49WPBB-AVVOWR is a red weatherproof surface-mount back box designed for use with TrueAlert ES wall-mount weatherproof visible (V/O) and audible/visible (A/V) notification appliances. This enclosure is required for proper installation of compatible outdoor-rated TrueAlert ES addressable horn strobes and strobes.
Constructed for rugged applications, the back box provides a sealed mounting solution and supports NEMA 3R weatherproof installations. It is designed to match the footprint and mounting configuration of Simplex 49VO and 49AV Series weatherproof appliances.
The 49WPBB-AVVOWR ensures correct depth and alignment for outdoor mounting and supports compliance with UL 1638 outdoor-rated installations when used with listed appliances.
-
Fiber optics communication links provide a high level of immunity from electrical noise. The circuits are power limited and suitable for use through hazardous atmospheres. Fiber optic circuits also provide a high level of security and are resistant to the effects of moisture. The choice of either single mode or multi mode fiber links is one of cost vs the distances between nodes. System performance is identical with either single or multi mode fiber.
Note: The 3-FIBMB2/MMXVR is compatible with 3-FIB(A) multi mode fiber modules.
The SMXLO2 standard output single mode transceiver is suitable for distances up to approximately 8.7 miles (14km). The SMXHI2 high output single mode transceiver is available to span distances up to approximately 24 miles (40km).
For multi mode applications, the MMXVR transceiver is suitable for distances up to approximately 8,000ft (2,400m) Actual distances are dependent on the losses in each fiber optic circuit, and should be calculated for each installation. One transceiver is required for each fiber side of both network and audio links. Simply order the required type and number and type of transceiver(s) for your application.
