Showing 121–132 of 132 results
-
QAR70.00
The Simplex 49WPBB-AVVOWR is a red weatherproof surface-mount back box designed for use with TrueAlert ES wall-mount weatherproof visible (V/O) and audible/visible (A/V) notification appliances. This enclosure is required for proper installation of compatible outdoor-rated TrueAlert ES addressable horn strobes and strobes.
Constructed for rugged applications, the back box provides a sealed mounting solution and supports NEMA 3R weatherproof installations. It is designed to match the footprint and mounting configuration of Simplex 49VO and 49AV Series weatherproof appliances.
The 49WPBB-AVVOWR ensures correct depth and alignment for outdoor mounting and supports compliance with UL 1638 outdoor-rated installations when used with listed appliances.
-
Fiber optics communication links provide a high level of immunity from electrical noise. The circuits are power limited and suitable for use through hazardous atmospheres. Fiber optic circuits also provide a high level of security and are resistant to the effects of moisture. The choice of either single mode or multi mode fiber links is one of cost vs the distances between nodes. System performance is identical with either single or multi mode fiber.
Note: The 3-FIBMB2/MMXVR is compatible with 3-FIB(A) multi mode fiber modules.
The SMXLO2 standard output single mode transceiver is suitable for distances up to approximately 8.7 miles (14km). The SMXHI2 high output single mode transceiver is available to span distances up to approximately 24 miles (40km).
For multi mode applications, the MMXVR transceiver is suitable for distances up to approximately 8,000ft (2,400m) Actual distances are dependent on the losses in each fiber optic circuit, and should be calculated for each installation. One transceiver is required for each fiber side of both network and audio links. Simply order the required type and number and type of transceiver(s) for your application.
-
The TX3962E Sounder Strobe Waterproof Box is an IP66-rated protective enclosure designed to house fire alarm sounder strobe units in outdoor or humid environments
-
The Tanda TX3963E is a heavy-duty, weatherproof protective enclosure specifically designed for manual call points (MCPs), manual fire alarm buttons, and non-acoustic fire modules installed in outdoor or harsh settings
-
- EN 54-7:2018 Certified
- Optical Smoke analogue sensor and digital communication
- Using microprocessor technology with memory capacity up to 10 events
- Provide real time algorithm to the control panel
- Smart linear drift compensation
- Onsite adjustable parameter
- 360-degree visual indicator
- Removable chamber against dust and small insect
- Ancillary remote indicator output
-
- EN 54-5:2017 + A1:2018 Certified
- Using microproces sor technology with memory capacity up to 10 events
- Fixed and Rate of Rise Analogue sensor and digital conmunication
- Provide real time algorithm to the control panel
- 360-degree visual indicator
- Onsite Adjustable Parameter
- Ancillary remote indicator output
-
- EN54-29 Compliance
- Smoke and Heat analogue sensor and digital com munication
- Using microprocessor technology with memorycapacityupto 10 events
- Analogue sending and digital addressing
- Provide real time algorithm to the control panel
- Smart linear drift compensation
- 360-degree visual indicator
- Onsite Adjustable Parameter
- Removable chamber against dust and small insect
- Ancillary remote indicator output
-
- EN54-11:2001 + A1:2005 Certified
- Using microprocessor technology
- Digital addressing
- Non-breakable glass and hammerless
- Safe to operate and easy to reset
- Recessed mount. OptionalTX7140-MB forsurface mount
-
- EN54-18:2005 Certified
- Built-in MCU processor and digital addressing
- 24VDC/2A Output relay contact and control module
- Input Fire or supervisory signal configuration
- LED status indicator
- Onsite Adjustable Parameter
- Loop powered or external power supply
- Surface mounting with fix base for simple installation
-
- EN54-3:2001 + A1:2002 + A2:2006 Certified/ LPCB Approved
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Programmable types such as Sounder-Strobe, Sounder or Strobe only
- Programmable Evacuate or Pre-alarm/Evacuate signal
- Low and normal consumption mode
- One or Two addresses mode
- 10 Highlights LED status cluster
- Onsite Adjustable Parameters
- Loop or external power input
- Ceiling or wall mount installation
-
- EN54-3 Compliance
- 8 high-light LED Loop powered sounder strobe detectorbase
- Can be activated by the attached detector
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Programmable Evacuate or Pre-alarm/Evacuate signal
- Programmable One or Two address mode
- Onsite Adjustable Parameters
- Mounting base using TX7980 (excluded)
-
- Used to mount intelligent smoke, heat, multi-sensor and sounder strobe base
- No electronics circuit
