Showing 1–12 of 13 results
-
- EN54-2:1997+A1:2006;EN54-4:1997+A1:2002+A2:2006 Certified
- Advance microprocessor technology with large memory capacity fire detection panel, available in a 1, 2 or 4 loop assembly
- Enhance user interface combining wide LCD Touch screen, color display and keypad access
- Support real time visual algorithm
- Enhance false alarm prevention
- Keypad and PC programming
- Built-in 4-in-1Multiple interface protocol such as USB/Ethernet/Can Bus/ Serial RS232 & 485
- Support Loop Powered devices for extra saving on cablecost
- Built-In Printer and 160 LED Zones Indicators
-
Dual loop card for TX7004-1/TX7004-2, capacity of 508 devices
-
The TX3962E Sounder Strobe Waterproof Box is an IP66-rated protective enclosure designed to house fire alarm sounder strobe units in outdoor or humid environments
-
The Tanda TX3963E is a heavy-duty, weatherproof protective enclosure specifically designed for manual call points (MCPs), manual fire alarm buttons, and non-acoustic fire modules installed in outdoor or harsh settings
-
- EN 54-7:2018 Certified
- Optical Smoke analogue sensor and digital communication
- Using microprocessor technology with memory capacity up to 10 events
- Provide real time algorithm to the control panel
- Smart linear drift compensation
- Onsite adjustable parameter
- 360-degree visual indicator
- Removable chamber against dust and small insect
- Ancillary remote indicator output
-
- EN 54-5:2017 + A1:2018 Certified
- Using microproces sor technology with memory capacity up to 10 events
- Fixed and Rate of Rise Analogue sensor and digital conmunication
- Provide real time algorithm to the control panel
- 360-degree visual indicator
- Onsite Adjustable Parameter
- Ancillary remote indicator output
-
- EN54-29 Compliance
- Smoke and Heat analogue sensor and digital com munication
- Using microprocessor technology with memorycapacityupto 10 events
- Analogue sending and digital addressing
- Provide real time algorithm to the control panel
- Smart linear drift compensation
- 360-degree visual indicator
- Onsite Adjustable Parameter
- Removable chamber against dust and small insect
- Ancillary remote indicator output
-
Sale!
QAR750.00 Original price was: QAR750.00.QAR650.00Current price is: QAR650.00.
- EN 54-12:2015 Compliance
- Hassle free alignment, built with digital guide display and laser beam pointer
- Employ single-ended design through reflective mirror
- Four ranges wide monitoring from 8-100 meters via encoder
- Three users programing sensitivity adjustment
- Built-in microprocessor
- Self-diagnosis function can monitor for internal faults
- Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter
- Fire and Fault interfacing relays
- Real User friendly alignment method
-
- EN54-11:2001 + A1:2005 Certified
- Using microprocessor technology
- Digital addressing
- Non-breakable glass and hammerless
- Safe to operate and easy to reset
- Recessed mount. OptionalTX7140-MB forsurface mount
-
- EN54-18:2005 Certified
- Built-in MCU processor and digital addressing
- 24VDC/2A Output relay contact and control module
- Input Fire or supervisory signal configuration
- LED status indicator
- Onsite Adjustable Parameter
- Loop powered or external power supply
- Surface mounting with fix base for simple installation
-
- EN54-3:2001 + A1:2002 + A2:2006 Certified/ LPCB Approved
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Programmable types such as Sounder-Strobe, Sounder or Strobe only
- Programmable Evacuate or Pre-alarm/Evacuate signal
- Low and normal consumption mode
- One or Two addresses mode
- 10 Highlights LED status cluster
- Onsite Adjustable Parameters
- Loop or external power input
- Ceiling or wall mount installation
-
- EN54-3 Compliance
- 8 high-light LED Loop powered sounder strobe detectorbase
- Can be activated by the attached detector
- Built-in MCU processor and digital addressing
- 17 tones Programmable sound output
- Programmable Evacuate or Pre-alarm/Evacuate signal
- Programmable One or Two address mode
- Onsite Adjustable Parameters
- Mounting base using TX7980 (excluded)
